Product Installation Overview
Felt Glide installation starts with mounting plate layout, screw fixing, load path control, height adjustment, and stability checks under the Furniture Legs, Feet, Bases, Casters, and Levelers base.
For B2B furniture production, use this Felt Glide guide to standardize marking, drilling, mounting, fastening, and final inspection before the hardware is approved for cabinet, panel, or furniture assembly.
This is only a simple installation tutorial. Specific adjustments should be made according to the actual furniture, panel material, and hardware specifications.
- Product
- Felt Glide
- Category
- Furniture Legs, Feet, Bases, Casters, and Levelers
- Installation profile
- Leg, Foot, Leveler, Base, and Caster Installation
- Priority
- 82
Detailed Felt Glide Installation Tutorial
Before You Start
Before installing Felt Glide, dry-fit Felt Glide on the furniture part and confirm the height reference. Mark from one clean datum edge, not from a damaged corner, so repeated pieces land in the same position. Identify the load path, mounting plate position, edge distance, and screw length under the furniture base.
Installation Method
During the Felt Glide work, use tape measure first, then drill or fasten gradually. Keep the hardware square to the panel, leave adjustment screws loose until alignment is checked, and compare the result with the Leg, Foot, Leveler, Base, and Caster Installation profile requirements. Fix every plate before height adjustment so the base settles evenly on all support points.
Final Check
After Felt Glide is mounted, operate, pull, load, or lock the part in the same direction a user will use it. Recheck gaps, screw seating, clearance, and surface damage before approving the Felt Glide installation for production. Level the furniture, apply load, and check wobble, caster travel, or glide contact.
Visual Step-by-Step Installation Guide
Step 1 of 6: Mark mounting plate or insert positions
Step by Step Installation Instructions
-
1
Mark mounting plate or insert positions For Felt Glide, mark every support point under the base and keep enough edge distance for load-bearing screws. Use tape measure for this operation and keep "height" as the main measurement check. Keep Felt Glide in position without fully forcing it until the alignment is verified. Before moving to the next step, confirm the reference line is visible, repeatable, and matches the product title and drawing requirement.
-
2
Drill pilot holes or install threaded inserts For Felt Glide, pre-drill plate or stem holes without weakening the base corner or stretcher. Use pencil for this operation and keep "adjustable range" as the main measurement check. Keep mounting plate in position without fully forcing it until the alignment is verified. Before moving to the next step, confirm the hole, cutout, or prepared surface is clean and does not break through the finished face.
-
3
Fasten the leg, foot, base, leveler, or caster For Felt Glide, place each plate, caster, glide, or leveler square to the underside reference. Use drill for this operation and keep "thread size" as the main measurement check. Keep fixing screws in position without fully forcing it until the alignment is verified. Before moving to the next step, confirm the hardware sits flush against the panel without rocking or twisting.
-
4
Set height or swivel orientation For Felt Glide, fasten all support points before adjusting height so the frame settles evenly. Use screwdriver for this operation and keep "mounting plate size" as the main measurement check. Keep Felt Glide in position without fully forcing it until the alignment is verified. Before moving to the next step, confirm fasteners are seated firmly without stripping, crushing, or shifting the hardware.
-
5
Place the furniture upright and level it For Felt Glide, level the furniture from side to side and front to back with small adjustments. Use wrench for this operation and keep "load capacity" as the main measurement check. Keep mounting plate in position without fully forcing it until the alignment is verified. Before moving to the next step, confirm the gap, reveal, height, and working clearance are even from the front and side.
-
6
Check stability and load distribution For Felt Glide, apply the expected furniture load and check wobble, rolling direction, and floor contact. Use level for this operation and keep "wheel diameter" as the main measurement check. Keep fixing screws in position without fully forcing it until the alignment is verified. Before moving to the next step, confirm movement, holding strength, and safety are acceptable before production approval.
Common Installation Mistakes
- Mounting Felt Glide too close to a weak panel edge.
- Using screws that do not match the load rating.
- Adjusting height before all legs or casters are installed.
- Ignoring floor contact and load balance.
Safety and Installation Warnings
- Use enough fixing points for load-bearing furniture and check floor protection.
- Wear eye protection and confirm all measurements before drilling.
Adjustment or Testing Notes
- Set Felt Glide height evenly and check furniture stability.
- Apply the expected load and inspect screw holding.
- Confirm caster movement or glide contact does not wobble.
Installation FAQ
What tools are needed to install Felt Glide?
Typical tools include tape measure, pencil, drill, screwdriver, wrench. For production work, add jigs, depth stops, or templates when repeatable positioning is required.
What measurements should be checked before installing Felt Glide?
Check height, adjustable range, thread size, mounting plate size, load capacity before drilling or fastening. Confirm dimensions against the product drawing and panel thickness.
Can Felt Glide be installed in MDF or plywood furniture?
Most furniture hardware can be installed in MDF, plywood, particle board, or solid wood when the pilot hole, screw length, load rating, and tightening torque match the material.
What is the most common installation mistake for Felt Glide?
Mounting Felt Glide too close to a weak panel edge.
Can Felt Glide be ordered for bulk furniture production?
Yes. Use the guide to define installation drawings, samples, tooling, and inspection standards before bulk furniture hardware production.