Drop Leaf Hinge for Laundry Cabinets
Drop Leaf Hinge for Laundry Cabinets should be selected for the load, cycle life, and environment specific to laundry cabinets. Recommended sizes, materials, finishes, and parameters are below.
Overview
For this application, drop leaf hinge is specified for the typical load, environment, and usage of this application. It must handle the typical demands of laundry cabinets while matching the surrounding furniture finish.
See the full Drop Leaf Hinge page for all sizes, materials, finishes, and specifications.
Key Specifications
| 0 | Array |
|---|---|
| 1 | Array |
| 2 | Array |
| 3 | Array |
| 4 | Array |
| 5 | Array |
| 6 | Array |
Values are configurable for OEM/ODM orders and confirmed on your datasheet.
Selection Factors
- Cup diameter (35mm is the furniture-industry standard; 26mm for thin doors)
- Cup depth and the required boring pattern
- Opening angle (95°–110° for most doors, wide-angle for blind corners)
- Overlay type: full overlay, half overlay, or inset
- Face-frame vs frameless (European) cabinet construction
- Door thickness and material
Installation Notes
Bore the 35mm cup, screw the hinge boss to the door, fix the mounting plate to the cabinet side at the correct height, then clip the arm to the plate. Use the three adjustment screws to align overlay, height, and depth.
⇲ Animated Installation Guide
Step-by-step SVG diagrams for installing Drop Leaf Hinge.
Open the installation guide →Related Applications
Request Bulk Pricing
Tell us your volume and target market. We reply with pricing, samples, and datasheets.
Request a Quote
Tell us your project requirement. Our engineers reply within one business day with bulk pricing, datasheets, and installation drawings.